D R P Silicone Mumbai, Maharashtra

Send SMS
Contact Us

New Items

Transformer Oil

Transformer Oil

Approx. Rs 500 / Kilogram


Typical Properties:      

Parameter

Value

 

Physical Properties

 

 

Appearance

Crystal Clear Fluid

Density

0.96 kg/dm3

Viscosity @25®c

50 Cst (mm2)

Water Content

50ppm

Refractive Index

1.404

 Electrical Properties

 

 

 

Dielectric Breakdown voltage

50kV

Permittivity @25®C, 50Hz

2.7

Dissipation factor @25C, 50Hz

0.0001

Volume Resistivity @25C ohm.cm

1.0 x 10¹⁴

Thermal Properties

 

Flash Point (open cup)

300®C

Fire point (open cup)

370®C

Volume Resistivity @25C ohm.cm

1.0 x 10¹⁴

 

Thermal Properties

 

 

 

Flash Point (open cup)

300®C

Fire point (open cup)

370®C

Specific heat

1.51kj/kg.k

Thermal Conductivity

0.151 W (m.k.)

Oxygen index

21.4 TDLOI

Coefficient of Expansion, cc/cc/®C

10.55 x 10⁻⁴

Glaze Polish

Glaze Polish

Approx. Rs 400 / Kilogram


We are the leading and prominent Manufacturer, Supplier and Trader of Glaze Polish.

Non Silicone Emulsion

Non Silicone Emulsion

Approx. Rs 60 / Kilogram


Description:

M.R Non-silicone Emulsion is a Mould Release Agent for Rubber and Plastic Industries. In Rubber Ind. like tyres, Tubes, Fan belts, Hoses, Gaskets and many other Rubber parts, M.R. Non-silicone Emulsion acts as an efficient and economical release, and shining Agent.


Properties:

M.R. Non-silicone EMULSION does not gum, or form carbonaceous deposits that build up on process equipment to cause expensive product rejection.

Release is complete, clean and surface finishes are blemish free and sharp in details. It improves safety and working conditions and acts an antis tick material and eliminates need. It is even non-volute and oxidation resistant.


Method of Applications:

Before applying M.R. Non-silicone Emulsion the mould should be completely wetted which assures a continuous, stable Parting film and helps minimize cost per moldings. Thus it eliminates sticking in extruders, moulds, calendars, and other equipment’s throughout the rubber processing Operation.

The technique for applying M.R. NON-SILICONE EMULSION varies because of deference in production equipment. M.R. NON-SILICONE EMULSION may spray automatically or applied manually by swabbing, wiping, dipping or hand spraying.


Note
: M.R. NON-SILICONE EMULSION other better shines than any other commercial 30% Silicone Emulsion.

 

 

Non- Silicone Defoamer

Non- Silicone Defoamer

Approx. Rs 75 / Kilogram


A Non-Silicone Defoamer is an antifoaming agent for the jet. Overflow jet high-temperature processing.

Application:

Ns defoamer must be diluted with cold water in the
Ratio 2 : 10. Stock solution need to be stirred before use.
Ns defoamer is used as a, foam preventative. It can be used to supress the foam already present in the water. The products can be used in all type of machinery although it’s strong point is for use in jet high temperature equipment. The diluted product can be added directly to the water.The application quantities depend on the composition of the treatment both temperature type of equipment however in general .
X
Provide Us More Details
Is this Requirement:

One Time Regular

How soon do you want this:

Immediate After 1 month

Purpose of Requirement:

Reselling End Use Raw Material

X

Looking for New Items ?

country-ico

We will contact you soon !

Dhruv Patel

(CEO)

D R P Silicone

Dahisar East, Mumbai, Maharashtra, India

More Categories

View All Categories »
Send SMS
Contact Us